Mesa de Som Digital Yamaha TF3

Outline

Fader Configuration: 24 + 1 (Master)

 

Mixing Capacity:  Input Channels: 48 (40 mono + 2 stereo + 2 return) 

                  Aux Buses: 20 (8 mono + 6 stereo)

                  Stereo Buses: 1

                  Sub Buses: 1

 

Input channel functions: 8 DCA Groups

 

I/O: Inputs: 24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)

     Outputs: 16 (XLR)

     Expansion slots: 1

 

On-board processors: DSP: 8 Effects + 10 GEQ

 

Especificações gerais

Taxa de amostragem: Interno: 48 kHz

 

Consumo de energia: 110 W

 

Dimensões: Largura: 716 mm (28.2in)

           Altura: 225 mm (8.9in)

           Profundidade: 599 mm (23.6in)

 

Peso líquido: 17.0 kg (37.5lb)

 

N-Série | Estúdio de Mixagem Digital: Expansion Card, Foot Switch (FC5)

 

Apresentação da Série CP na Musikmesse Frankfurt 2010 (inglês): Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C

 

General specifications

Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz

Fader: 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders

Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)

Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT

Dynamic range: 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.

 

Hum & noise level: Equivalent input noise: –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)

                   Residual output noise: –85 dBu, ST master off (Measured with an A-Weight filter)

 

Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.

 

Power requirements: 100–240 V 50/60 Hz

 

Acessórios: Quick Guide, Power Cord, Nuendo Live